How to Use Google’s Disavow Tool For Better Rankings

How to Use Google’s Disavow Tool For Better Rankings

Recently, I had a friend ask me for help because her website rankings were tanking.

Always willing to lend a helping hand, I asked her what she had been doing to build links and improve SEO.

Everything she was doing checked out OK. So, I fired up Ahrefs and took a look at her backlink profile. That’s when I saw it.

Tons of spammy links were pointing to her site. These links were killing her rankings.

Then I took a look at her Google Webmaster Tools account and saw that she had a manual actions report stating that her website had been penalized for low-quality links.

Here’s an example from linkresearchtools.com that shows what that report looks like.

manual action unnatural links to your site message google disavow tool

I asked her if she tried using the disavow tool to remove these spammy links. She looked at me like a deer in headlights.

Here’s the deal:

It’s no secret that spammy links can penalize your site’s rankings.

Knowing how to build links is a cornerstone of SEO. But the flip side is knowing how to avoid having harmful links point to your site.

If you don’t know how to protect yourself from bad backlinks, you could be setting your site up for epic failure.

The good news is that you can audit your link profile and use Google’s disavow tool to prevent or reverse any penalties.

If you use it the wrong way, you can do more harm to your site than good. You’ll want to make sure you’re careful when using the tool.

This article will teach you how to use the tool well.

What is Google’s Disavow Tool and When Should You Use It?

Before we go into using the tool, let’s dive into the concept of disavowing links.

Good backlinks can raise your Domain Authority (DA) and Page Authority (PA) scores, increase your visibility in search engines, and help you rank better.

Bad backlinks do just the opposite. They harm your SEO and cause you to lose ranking.

With that said, you shouldn’t go disavowing links left and right.

When you disavow a link, you’re telling the search engines not to factor in a specific link when crawling your site.

There are a few categories of bad backlinks you might consider disavowing:

  • Sites set up just for links
  • Obviously spam sites
  • Links in spam comments
  • Backlinks from sites in your non-target country/countries (e.g., a backlink from a German site when your audience is in the U.S.)

If you don’t have control over the spammy links, use the disavow tool so Google disregards them.

Google disavow tool screenshot

Google’s Disavow Tool Warning

According to Google, using this tool the wrong way can have a negative effect on your rankings.

google disavow tool warning

That sounds pretty intense, but don’t worry; Google just wants to make sure you’re not disavowing the wrong links. You should request removals first, and I’ll talk about that later.

Just make sure you use the tool when you have a lot of low-quality backlinks pointing to your site and when you’re sure they’re causing problems.

The good news is that if you use it the right way, you can improve your rankings.

Disavow Tool Best Practices

There are a few important rules of thumb you should follow when using the disavow tool.:

Try Removing Links Via Email First

Google prefers that you try removing links on your own before using the disavow tool.

You can do this with a link removal request.

A link removal request occurs when one site owner emails another to request the removal of a link.

Moz shows an example of a link removal request here.

link removal request email disavow tool

Unfortunately, link-removal requests get a bad rap. Oftentimes they’re ignored, missed, malicious, and even spammy. There’s an art to sending successful link-removal requests.

Use It When You Need It

Matt Cutts (former head of Google’s Webspam team) gives the green light on using the disavow tool:

pasted image 0 964

You may be worried about negative SEO or a bunch of spammy links pointing toward your site. In this case, it would be a good move to disavow. It’s OK to disavow links even if you don’t see a message in your webmaster console.

If your removal-request emails aren’t effective, feel free to use the disavow tool whenever you need.

Use It Like a Shotgun, Not a Rifle

Instead of picking out bad links one by one, you should instead use the domain operator to disavow all bad backlinks from a whole domain instead. This is also a faster method for improving rankings. It may take longer to see results if you handpick bad links one by one.

How to Use the Disavow Tool: A Step-by-Step Guide

Now it’s time to dive deep into how you can use the disavow tool — step by step

Create a List of Backlinks

There are lots of different tools that you can use to get a list of your backlinks.

These services often try to automate the auditing process. While it does save time, you won’t get as clean of a result as would if you manually reviewed each link.

To create your own backlink list manually, here’s what you do.

Download Your Links From All Sources

First, go to Google Webmaster tools. Click search traffic, and links to your site. Download both the latest links and sample links.

google webmaster tools links to your site disavow guide

If your site has a large number of domains linking to it (over 1,000), you can find more links by downloading the sample link list every day for a few days.

You can also download links from other sources:

  • Open Site Explorer: A great tool from Moz, one of the largest brands within the advanced SEO community.
  • Ahrefs: One of the most accurate and largest databases of live backlinks
  • Majestic SEO: Breaks down a lot of information into digestible, granular pieces. This tool is great at preventing overwhelm.
  • Ubersuggest: View your backlink profile, see content suggestions, and more.

Put Your Links into One Spreadsheet

Once you have gathered the spreadsheets from your sources, find the URL column of the sites that link to you and copy this column into a new spreadsheet. Feel free to use Google Docs or Excel — whichever you prefer.

Now you’ll have a master list of every link that leads to your site. You will see some duplicates, but don’t worry because we’ll fix that later.

Break the URLs into Subdomains

Make a new column that is to the immediate left of your URLs. At the top of the spreadsheet (A1), type this formula:

=left(B1,find(“/“,B1,9-1)

Now, highlight the entire column and hit CTRL+D on your keyboard. This will fill in each cell in the row with the formula.

pasted image 0 946

Once that’s done, highlight the whole column again and convert the results of the formula into values. This will allow you to copy and paste data into the column.

Do this by hitting CTRL+C to copy, then press Edit, Paste Special, and Paste Values Only.

Next, let’s use the Find & Replace tool to break everything down to its subdomain.

With column A highlighted, click edit, then find and replace. Type “HTTP://“ (without quotes), don’t put anything in the replace field, and hit “Replace All.”

sort links for disavow tool

Repeat the same steps with these two phrases

  • https://
  • www. (Remember the period after www)

After you’re done, column A will now have the subdomains or domains of each URL that points back to your site.

sort links disavow guide

Get Rid of Duplicate Links

You’ll likely have some domains with several links. What we want is to only have one link from each domain. Sort column A into alphabetic order and then insert a new column to the left of the domains. Put in this formula:

=if(B1=B2,”duplicate”,”unique”)

Copy this down the entire spreadsheet again (you can also click the little plus sign in the lower right-hand corner of a highlighted cell — also known as the “fill” button).

Next, filter this column to only show the duplicates. Finally, delete each duplicate URL.

Now you’ll have one URL for each domain that’s giving you a backlink.

Audit Your Backlinks

Now, click on each URL on your spreadsheet and decide if you want to keep all the links from each domain or disavow them.

audit backlinks example disavow tool guide

If you’re unsure, you can always mark links as “maybe” and come back to them later after you’ve looked at all your links.

Sometimes, you can pick up patterns after looking at all of your links that you wouldn’t have seen otherwise.

If you’re not sure whether or not you should disavow a link, think through these questions:

“Does this link help me?” i.e., “Could I actually get business and/or traffic from this link?”

“Was this link made 100% for SEO only?”

“If a Google employee saw this link, would I be worried?”

Remember that Google only penalizes sites that are trying to game the system. Every site has its share of unnatural links.

You’re not going to get hit with a penalty if you’re playing by the rules. So if you see some unnatural links, don’t sweat it.

Make a Disavow File

Once you’re done reviewing each link, filter the column so you only see the links that you want to disavow.

Next, make a new spreadsheet and copy and paste your domains into the new sheet.

filter your disavow file

Next, you want to add “domain:” (no quotation marks) in front of every domain name.

When you disavow on the domain level, you’re doing a clean sweep of all the bad links on that domain. When you disavow by URL, you’re more likely to miss bad links.

You’ll want to always disavow at the domain level.

Type the following formula into B1 to add “domain:” to the front of every domain name.

=“domain:”&A1

Use the fill button to paste the formula down the entire column. Once again, highlight the column and then select paste special, paste as values.

Now, column B will be full of disavow directives.

create a disavow file screen shot

Make a Text File

Your disavow file must be in 7-bit ASCII or UTF-8 format. You can do this a couple different ways.

On a Mac, open TextEdit, copy and paste column B into TextEdit, and then hit Format and make plain text.

On Google Docs, open a Google Doc, copy column B into a document and then click File, Download As, and Plain text.

Add Comments

Feel free to add comments to your disavow file by starting your comment with a #. But remember, Google employees don’t look at your disavow file.

The disavow tool is 100% automated. Any comment you add is for your own records. You can insert them to jog your memory on certain things when revisiting the file in the future.

google disavow file example

File Your Disavow

Go to the disavow tool and pick your file from the dropdown list. Click disavow links twice and then select “choose file”. Then you’ll want to upload the .txt file you made.

Here’s what a successful disavow looks like:

pasted image 0 974

Top Disavow Tool Mistakes

You may run into errors when you attempt to disavow links.

Luckily, it’s very common for an error to pop up when disavowing links. In this video, Matt Cutts talks about common mistakes that people run into when using the disavow tool.

  • You should only upload a regular text file. No sorting, fonts, or syntax should be added to this file. People try to upload spreadsheets, Word docs, and other file formats. Only upload a text (TXT) file.
disavow text example
  • Start out by using the domain: command when disavowing links so that you disavow all links from the entire site. Many times, users will try to disavow specific URLs with a fine-tooth comb. Don’t do this.
  • Incorrect syntax is another issue that pops up a lot. Make sure you use a TXT file with the proper syntax.
  • If you want to provide commentary on why Google should disavow certain links, save that for the reconsideration request. Don’t write it in the text file.
request review disavow guide
  • When you comment using the disavow tool, make sure that you use tags. If you don’t, it will cause syntax errors. In fact, it’s best to limit your commenting.
  • The disavow tool is not a magic wand that will fix every URL. You should clean up your link profile manually in addition to using the tool.

Frequently-Asked Questions

Still got questions? Here’s a few of the most-asked questions

How Often Should I Use the Disavow Tool?

This all depends on your link profile. For example, if your site has a track record of unnatural links, you may need to do a monthly disavow.

In other cases, it’s best to do a link audit first and then a disavow.

By spacing out every disavow, you give yourself time to spot recurring problems and trends. This will help you make better decisions with your link-building strategies.

But if you have an average website that doesn’t have a history of low-quality links, and if you aren’t in a super competitive space where negative SEO isn’t much of a factor, you’re good with disavowing only once or twice per year.

When Should I Remove a Link Manually and When Should I Use the Disavow Tool?

Removing a link manually should always be your first option.

But, if you’re hit with an algorithm penalty, say from Penguin, there’s no need to go on a long, drawn-out process of emailing site owners to ask them to get rid of links.

In that case, you should disavow. But, if you’ve been hit with a manual penalty, you should definitely try to manually remove links first.

Can I Reavow a Link if I Make a Mistake?

pasted image 0 960

To reavow, modify your disavow file by removing the directive and re-upload it. Matt Cutts has stated that it takes “a lot longer” to reavow a link than to disavow it.

Google purposely builds in this lag time to discourage spammers from trying to game the system.

How Long Will It Take to See Better Traffic and Rankings?

Google applies your disavow directives to your links as soon as it crawls your site.

After you’ve uploaded your directives, Google applies an invisible nofollow tag to the disavowed links that point to your site.

This means that those links will be thrown out of the equation when the Google algorithm considers your website.

You’ll need to wait until Google needs to run the algorithm again, so you won’t see changes right away. Most links only take a month to be removed.

Quick Guide to Using the Disavow Tool

The Disavow tool is a powerful tool to clean up your link profile. Here’s how to use it.

  1. Download All Links From All Sources

    Head to Google Analytics, Ubersuggest, and Ahrefs to view all your links.

  2. Sort The Data

    Pull all the lists together, then remove duplicates and sort.

  3. Audit Your Backlinks

    Check to see which links are problematic, remove the ones that are okay.

  4. Attempt Manual Removal

    Send emails to sites asking them to remove the links.

  5. Create a Text File

    Your disavow file must be in 7-bit ASCII or UTF-8 format. You can do this a couple different ways.

  6. Add Comments

    Use # to add comments or notes as needed.

  7. Submit the File to Google

    Send your file over and wait for Google’s decision.

Conclusion

Whether it’s from hiring a shady SEO agency or being the victim of negative SEO, you’ll need to disavow bad links before you get penalized.

However, be careful and don’t abuse the tool. Disavowing the wrong links can hurt your rankings the same way bad backlinks can.

If you carelessly disavow links, your backlink profile may look unnatural and can cause you to get penalized.

You must review individual backlinks before you submit your disavow file. There’s no getting around it.

When you get things right, though, and your traffic and SEO will improve.

The disavow tool is not the end-all-be-all magic button that will send tons of traffic your way.

However, it is a great SEO tool to have in your arsenal and one that every site owner should be familiar with.

What results have you experienced from using the disavow tool?

Build your free WordPress website with Host2.us free hosting today!

About the Author

Leave a Reply